E-Mail: webmaster@jawed.co.in
All the content/s are collected from the search engines and/or free resources. Please read disclaimer before using/downloading any content/stuffs or whatsoover.
All Logo/s,Trade Mark/s,Stuff/s,Content/s,Material/s,Software/s are property of their respective owner
For any query please contact at webmaster@jawed.co.in
All Logo/s,Trade Mark/s,Stuff/s,Content/s,Material/s,Software/s are property of their respective owner
For any query please contact at webmaster@jawed.co.in
What is an RFC? Name a few if possible (not necessarily the numbers,
just the ideas behind them) What is RFC 1918?
Address Allocation for Private Internets February 1996 capabilities of Internet
Service Providers. Efforts are in progress within the community to find long term
solutions to both of these problems. Meanwhile it is necessary to revisit address
allocation procedures, and their impact on the Internet routing system.
What is CIDR?
Short for Classless Inter-Domain Routing, an IP addressing scheme that replaces
the older system based on classes A, B, and C. With CIDR, a single IP address can be
used to designate many unique IP addresses. A CIDR IP address looks like a normal
IP address except that it ends with a slash followed by a number, called the I
P network prefix. For example: 172.200.0.0/16 The IP network prefix specifies how
many addresses are covered by the CIDR address, with lower numbers covering more
addresses. An IP network prefix of /12, for example, can be used to address 1,048,576
former Class C addresses. CIDR addresses reduce the size of routing tables and make
more IP addresses available within organizations. CIDR is also called supernetting.
You have the following Network ID: 192.115.103.64/27.
What is the IP range for your
network?
192.115.103.65 to 192.115.103.94
You have the following Network ID: 131.112.0.0. You need at least 500 hosts per
network. How many networks can you create? What subnet mask will you use?
No of networks = 128 ,
I User Subnet Mask = 255.255.254.0
You need to view at network traffic. What will you use? Name a few tools ?
Monitoring network traffic tool
How do I know the path that a packet takes to the destination?
use "tracert" command-line
What does the ping 192.168.0.1 -l 1000 -n 100 command do?
The ping command will send roundtrip packets to a destination
( other PC, router, printer, etc.)
and see how long it takes. The 192.168.0.1 is the destination ( which, by
the way is a typical default IP address of a router. ) The -l 1000 is how
big the packet should be in bytes. The default is 32, if the -l parameter
is not used. And the -n 100 is saying to send, it 100 times.
The default is 4, when this parameter is not used.
just the ideas behind them) What is RFC 1918?
Address Allocation for Private Internets February 1996 capabilities of Internet
Service Providers. Efforts are in progress within the community to find long term
solutions to both of these problems. Meanwhile it is necessary to revisit address
allocation procedures, and their impact on the Internet routing system.
What is CIDR?
Short for Classless Inter-Domain Routing, an IP addressing scheme that replaces
the older system based on classes A, B, and C. With CIDR, a single IP address can be
used to designate many unique IP addresses. A CIDR IP address looks like a normal
IP address except that it ends with a slash followed by a number, called the I
P network prefix. For example: 172.200.0.0/16 The IP network prefix specifies how
many addresses are covered by the CIDR address, with lower numbers covering more
addresses. An IP network prefix of /12, for example, can be used to address 1,048,576
former Class C addresses. CIDR addresses reduce the size of routing tables and make
more IP addresses available within organizations. CIDR is also called supernetting.
You have the following Network ID: 192.115.103.64/27.
What is the IP range for your
network?
192.115.103.65 to 192.115.103.94
You have the following Network ID: 131.112.0.0. You need at least 500 hosts per
network. How many networks can you create? What subnet mask will you use?
No of networks = 128 ,
I User Subnet Mask = 255.255.254.0
You need to view at network traffic. What will you use? Name a few tools ?
Monitoring network traffic tool
How do I know the path that a packet takes to the destination?
use "tracert" command-line
What does the ping 192.168.0.1 -l 1000 -n 100 command do?
The ping command will send roundtrip packets to a destination
( other PC, router, printer, etc.)
and see how long it takes. The 192.168.0.1 is the destination ( which, by
the way is a typical default IP address of a router. ) The -l 1000 is how
big the packet should be in bytes. The default is 32, if the -l parameter
is not used. And the -n 100 is saying to send, it 100 times.
The default is 4, when this parameter is not used.
For Question & Answer on DHCP and Its process etc. click here
For Question & Answer on IP Address,
Subnet Mask, ARP etc. click here
Subnet Mask, ARP etc. click here
For Question & Answer on DNS, DNS Zones etc. click here
For Question & Answer on DNS, DNS Zones and AD etc. click here
For Question & Answer on Windows Clustering , NLB, WINS click here
For Question & Answer on IAS & RAS, PAT, NAT, VPN click here
For Question & Answer on Domain, DC, Active Directory and its features etc. click here
For Question & Answer on LDAP,AD- Structure & Namespace etc. click here
For Question & Answer on Application Partition, DC- Backup, Sysvol etc. click here
For Question & Answer on Recovery/Restore of DC & GC etc. click here
For Question & Answer on Global Catalog, REPLMON. LDP, ADSIEDIT etc. click here
For Question & Answer on Netdom, Sites, KCC, ISTG etc. click here
For Question & Answer on FSMO and its roles etc. click here
For Question & Answer on Active Directory (AD) & its backup etc. click here
For Question & Answer on GPO, GPC and GPT etc. click here